JEI Minibeast Cordless C/W Battery And Charger

1,480.00 Excl. VAT


Battery-Operated, Compact Magnetic Drilling Machine

The MiniBeast™ Cordless is a battery-operated, compact magnetic drilling machine designed to drill holes with a diameter up to 36mm (1 7/16″) with annular cutters. With twist drills, the MiniBeast™ Cordless can also drill holes with a diameter of up to 12mm (0.47″). This compact drilling machine is also equipped with a LED monitoring system that generates signals in green and red to indicate the current condition of the drill and give safety information.

  • Compact and powerful – lightweight at 11.5kg (incl. 4.0Ah Battery)
  • Self-correcting slide rails – for maintenance-free operation
  • Fully compatible with CAS battery units
  • Equipped with LED monitoring system – Indicates operating performance of the machine and provides safety information when magnet not adequately engaged to material
  • Overload protection – prevents misuse of the machine
  • Tilt sensor – to stop the motor if the machine breaks away from the surface whilst in operation
  • Energy saving magnetic base uses only 50% of it’s power when motor is not running
  • Perfect for drilling in remote areas

LED Monitoring System

LED interface generates green and red signals to indicate the drill’s current condition and give safety information. It provides a quick exchange of information between the drill and the operator in the event of an emergency.

LED Monitoring System

New Control System of Battery Pack 


• 2-stage over-discharge battery protection system

• Extended battery life

• High level of safety for both cordless drill and operator

Detection and supervised parameters:

• Too low and too high power

• Too low and too high temperature

• Failure of the temperature sensor

• Internal battery failure

Model MiniBeast™ Cordless
Weight with 4.0Ah Battery 11.5 kg
Spindle 19mm
Cutter Capacity 36mm x 2” Depth of Cut
Twist Drill Capacity 12mm with optional Turbo™ Twist Drill
Countersink Capacity N/A
Tapping Capacity N/A
Reaming Capacity N/A
Motor 450 W
Height Min/Max 330mm / 370mm Inc. Carry Handle
Max Stroke 70mm
Minimum Workpeice Thickness 6mm
Length / Width 316mm / 235mm
No of geared Speeds 1 Fixed Speed
RPM 300 RPM (under load)
Magnetic Base Dimensions 80 x 160mm
Magnet Deadlift (on 25mm plate) 866 kg on 1” Plate (8500N)
Noise Level <90dB
Vibration Level <2.5 m/s2
Voltage / Part No. 18v DC / DRILL-MBC
Shipping Weight (Incl. 4.0Ah Battery) 15.65 kg
Shipping Dimensions 70 x 46 x 19cm


110v, 220v

You may also like…

To top